Farmall & IHC Tractors Discussion Board |
Re: Diesel Oil Pressure
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by T_Bone on January 09, 2001 at 03:00:17 from (207.254.53.61):
In Reply to: Diesel Oil Pressure posted by brian on January 08, 2001 at 06:30:15:
Hi Brian, Oil pressure has to do with alot of items. Example, The spec in the manual is for pressure with the recomended oil weight 30w, at 70f abiment temp with engine running at 180f coolant temp at 1500rpm = 70psi oil pressure. Change any one of the above and the oil pressure will be different and I'm not quoting any pictular spec either. A every day tractor mounted gauge will not be as accurate as a Stewart Warner oil pressure gauge that is used for nothing but testing. Oil pressure is also different for every engine. To say that 45psi is correct for every engine would not be correct but would be a close enough reading to not to worry about it. I did buy a 75 psi IH "logo" oil pressure gauge at Buckeye Tractor recently. T_Bone
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|