And 856 with a M&W hair dryer is probably turning 115-120 horse and a seven shank with 4 inch twisted shovels will work well as long as you have a full rack of ft. weights loaded tires and duals . one other thing is tire size , if it has 18.4 x 38's or is it down on 18.4 x34's . You should be able to run first high in descent ground around 8-10 inches deep. My 806 will run a 9 shank straight shovel eight to ten inches deep but it is a three point . We are now DEEP ripping with a barn yard engineered Land Doll disc chisel that now had five DMI parabolic Tiger shanks with seven a half inch Tiger points and five or six inch upper shank shovels and going down thirteen inches or in other words five to six inches into the clay behind a 1066 that is tweaked and weighs in at around 18500 . now normally we can run first high , but Wednesday was not the case as i was ripping one ten acre field that we had chopped corn on when it was to wet in the rain and the wagon tracks in places would take you from 6-7 MPH to 0 in the blink of and eye . I had the pony power but was lacking traction and weight even with the duals .
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
