Posted by Tallguy67 on October 25, 2014 at 13:55:55 from (216.45.124.224):
Good afternoon folks. I used to be an active member on here a number of years ago but my tractor hasn't needed work in so many years that I have lost track of my old user id and password. Well my old tractor isn't very happy so I need some help. It would appear that the carb isn't happy. I can get it to run on ether so I know it is fine electrically and mechanically. I get lots of fuel to the top of the carb and the little brass filter up top is crystal clear. However, I don't get any fuel into the carb. I took the drain out of the bottom of the bowl and there isn't anything in there. I even took out the fuel regulating needle valve and I don't get any fuel there either. So lots of fuel at the top of the carb and nothing in the carb. At this point I want to get the carb off to either clean it out, rebuild it or replace it. The two main nuts holding it on are 9/16". I can easily get to the front nut but I cannot find any way to get a socket, box end or open end wrench on that back nut. The only option I see so far is to remove the intake manifold and I really don't want to do that just to fix the carb.
Thanks in advance for any suggestions on how to remove the carb.
If you have a better suggestion about solving my fuel problem I would be interested in those suggestions too.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.