Posted by S MacKay on September 16, 2014 at 05:34:46 from (174.89.39.82):
Anyone want to walk me backwards through this successful repair?
Super A running rough and hot. Decided the problem was fuel supply and cleaned sediment bowl, elbow screen and switched out carb for recently rebuilt one. After a some tinkering on the ignition side of things I thought to blow out the sediment bowl from the tap. That's where the main problem was.
Anyway I also refurbished the ignition which was not a bad thing to do. The point contact in the distributor was cooked (and I mean cooked) and also there was quite a bit of play in the distributor shaft. Fixed that up.
My lingering question is: why was the contact in the distributor cooked? Could it be because the tractor ran lean for too long or was that problem because of a bad coil (or condenser) and therefore unrelated? Or some other reason?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.