Posted by dodger42 on August 20, 2014 at 14:50:32 from (76.112.97.194):
I've been trying to get a '38 F20 I've owned for 25 years started again. For various reasons, it sat in my pole barn for at least 20 of those years, never started and never moved. I'd crank it now and then to keep it loose,though.
Well, I cleaned the fuel system all up, and rebuilt the carb, and really cleaned it up-I even drilled out all the passage plugs to clean in there, and then I replaced them with new plugs. New plugs, and a rebuilt magneto. The tractor will start right up on full choke, and idle nicely, but it won't stay running if I try to take it off the choke-the engine speeds up, but then the engine dies if I try to open the choke (even if the tractor is fully warmed up). I've tried to set the idle and main jets to the settings recommended on this form, but nothing changes. If I try to open up the choke, the engine speeds up. and then it stops. If I pull the choke back closed right away, the engine will catch again, and go back to idling well. What should I be looking at?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
