Posted by Picklesmith on May 04, 2014 at 15:36:16 from (72.181.66.217):
I have a 1948 Farmall M with magneto ignition. The tractor has run well for about 2 years. Recently, I have not been able to get the tractor started. I have determined the starting problem to be related to ignition.
By removing a spark plug wire, I can tell that there is no spark being delivered to the spark plugs. Additionally, there is no spark being delivered to the distributor by the secondary lead out from the magneto.
I can time the magneto to #1 cylinder per IH instructions. I have also changed the condenser (and the points), but I still get no spark.
One oddity that I did notice: I can read continuity between the condenser terminal screw and the tractor chassis as though the "kill switch" has the magneto grounded. Removing the wire from the ignition switch to the terminal makes no difference---the magneto still seems to be grounded. Internally, the magneto seems to be in good order with no wires to the condenser touching the case.
Does anyone have suggestions or recommendations? Appreciate your help
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.