Posted by The tractor vet on April 29, 2014 at 16:21:49 from (75.24.5.173):
In Reply to: SMTA hydraulic setup posted by Brady Miller on April 29, 2014 at 12:21:26:
1250 is what a good system will do and trying to push more you will most likely lean all about cam gear failure . You will be like the one guy around here that did away with the Hyd. unit under the fuel tank and made up a tank for the oil and ran everything from the pump to his valve set up . First time he use it when he went to lift the disc at the head land to turn he did not let off the handle of the valve fast enough and deadheaded the cylinder and before the relief valve opened to dump the pressure off his tractor just stopped dead. It would not restart and i get this call about his tractor died . So road call and start looking at his reenginering and had to look no further then the rotor , when you tried starting the tractor the rotor did not turn anymore . So a new set of cam gears and it was back running and i reset the regulator to 1250 and it was fine . On the OLD systems if what your trying to lift won't lift get a bigger cylinder or get a newer tractor with higher pressure hyd.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
