Posted by D Slater on April 16, 2014 at 05:23:32 from (184.14.205.2):
In Reply to: 350 ta deleat posted by jerry 4 on April 15, 2014 at 10:28:55:
Found some that the previous owners discarded the t/a clutch pressure plate, drilled holes through the clutch plate and into the t/a clutch carrier and bolted together to stop them slipping. Looks like they still had to split behind the engine and remove the plate and carrier to do. Only problem is even if slipping in t/a side the thing will probably still catch part of the time and cause hard shifting of the transmission. You can take the t/a unit out with a double spit and remove the rollers to stop the hard shifting. Or its the same amount of work to repair the clutch and have direct drive and proper shifting or a double split and repair both. There is a t/a eliminator kit made but won't save any work or much money. Other option is find the parts from a tractor that came without a t/a. Not many around and most have the splines driving the transmission input shaft worn bad and good replacements real hard to come by. Still a bunch of work to install.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.