Posted by RTR on April 01, 2014 at 08:27:58 from (216.226.179.180):
Hey guys, I've posted this topic in another forum and thought I would share here to see if you guys had any input. This has to do with the 1-row Cultivator for the Farmall Cub, Super A, 100, 130, 140, not just the Cub as it is directed to in the dialogue.
-------------------------------
As many of you are well aware, there are many Cub Cultivator sets (not just Cub really) out there are are in functioning order but are well worn at the joints. With a worn cultivator set, you have a lot of movement and slack in all of the joints causing them to not be very accurate when cultivating through soil and possibly digging up your plants. A good, tight cultivator set is getting harder to find having that 98% of the cultivator sets out there are used and no new ones being made.
I am looking for some suggestions and ideas on how you all have restored them or have seen done. I realize that alot of the joints can be tightened up using the bolts on the brackets, and I will be replacing all bolts on the cultivator with the original style and tightening them that way to see if that helps; but what about the slack from wear when the bolts are tightened all way up? What would you do in that case? Shim? Weld and grind? Sleeve? Has anyone restored a worn set to make them tight again?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
