Posted by PRESTONLAW on September 06, 2013 at 12:12:20 from (184.21.22.7):
This message is a reply to an archived post by Andrew Psencik on December 02, 2012 at 14:53:27. The original subject was "Strange Farmall H Hydraulic valve assy.".
(quoted from post at 16:53:27 12/02/12) Here is a pic of it. Common sense tells me it was to control a cultivator. Has IHC stamping and part #. It is cast into pedestal. Was this a factory option? Never seen it before. Tractor is a "42 model. Thanks A.P.
I have this on my 1942 H. It was a option on the 1942 and it is super rare to find them.
I believe it was called a "Christmas Tree" valve.
There should be a rod connecting the control lever to the transmission on the right side.
This was used to control at least two separate hydraulic devices. The one that I have is operable and operates the rear lift (for the three point).
This amazing little option was designed so that you could hook up at least one more set of hydraulics just by using standard pipe fittings you could get in a hardware store, and, standard hydraulic lines.
You operate it by pulling the lever back to release hydraulic pressure to the device. If you want to divert hydraulic pressure to a device, then, you push down on the lever and move it completely forward in the slot.
I am not sure why it has three slots (yet). I just ordered the original parts supplement for the Farmall H and I"ll keep you posted. I think, as far as I can tell, that the middle slot is a neutral position for the lever.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.