Farmall & IHC Tractors Discussion Board |
Re: Ottawa backhoe on W-6 Farmall
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by REDHUSKY91 on November 17, 2000 at 09:37:32 from (63.120.168.100):
In Reply to: Ottawa backhoe on W-6 Farmall posted by Ron Panek on November 16, 2000 at 05:48:50:
I have a wagner hoe on a 300u. the swing cyl. were rebuilt at a local hyd. shop (snow plows etc). They should be done as a pair, so they hold the boom firm when moving the tractor, there is alot of weight hanging back there. I needed new chrome rods which up the price. One of my boom cyls also was done and the bore was also scratched (scrap). The cyl was custom made from scratch, all but the clevis, rod end and glands were made new. That hurt the wallet bigtime. So a $100 reseal + new rod(if you need them) could be in the $100-300 range each. The 4 ft stroke cyl. custom made was $800. So be prepaired $200-$600 a pair. One more piece of advice is: the big cyl was taken to a cheaper shop and they said the bore was ok- be carefull- they don't care if the seal wears out in a short time. I need to do some more cyls- they should last 20-30 years- so do it right the first time.
Follow Ups:
Home
| Forums
Today's Featured Article -
Picking Corn - by Rick Nikolich. It was the day before Christmas shutdown at work and I asked our lead engineering expert Scott Andrzejewski what he was going to do over the holidays. He said that he had some corn that he still needed to pick with an antique one-row New Idea corn picker. Scott has a nice farm about an hour north of Lansing in St. Johns, MI. He wanted to get the rest of his corn in by the next day (Christmas Eve). We had about an inch of new snow on the ground and single digit temperatures. So in the bac
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|