Re: 560 valve oiling

Posted by pete 23 on April 16, 2013 at 20:13:58 from (74.47.40.242):

In Reply to: 560 valve oiling posted by Bill in IL on April 16, 2013 at 17:59:35:

Be sure to check that stream of oil out of end of rocker arm shaft. There is not that much supply coming up there anyway so it would certainly short change the other rockers. One other thing you have to watch on those engines. Number three pedestal is where the oil comes up from below. Some times the oil hole in rocker arm shaft gets partially covered by the pedestal. I saw one, later model engine in a 666 that covered that hole completely and no oil to rockers at all. Just a slight shift in the pedestal when assembled covered hole as engine ran for many years previously with no problem. I lengthened the hole so it could not happen again. The wear on rocker arm bushings and shafts are often over looked also and this causes all kind of problem, but usually excess oil to valve area.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]