Farmall & IHC Tractors Discussion Board |
New carb on 1945 A
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Dave G on November 02, 2000 at 09:33:42 from (63.91.152.40):
Old carb had a crack in bowl, so ordered new Zenith carb from IH dealer. Price was only a little more than for rebuilt. Although my A is gas only, the replacement carb is one for kero/distillate. Installed carb, set idle screw and main jet adjustment according to I&T manual. Also installed rod from carb to governor per instructions. It idles well. Main jet adjustment is only about 1/2 - 3/4 turn between running uneven and smoking. Problem: when opening throttle from idle to full load, it needs to be done slowly or engine bucks and sputters for a few moments. Also if beginning to move with Bush Hog running (throttle open), have to let out clutch very slowly or we get the bucking and sputtering. Have tried various settings with idle screw and main jet, but nothing seems to help. Also cleaned out fuel tank, installed new sediment bowl assembly, and new fuel line. Fuel appears to flow freely to carb. Also checked the little screen on inlet to carb. Could this be problem with governor? Thanks for any suggestions. DG in northeastern PA.
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|