Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Clutch Adjustment on a Super A
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Garnet Best on October 29, 2000 at 18:32:35 from (142.177.7.2):
In Reply to: Re: Re: Clutch Adjustment on a Super A posted by Tyler (MD) on October 29, 2000 at 12:45:29:
Normally if clutch is worn it works the other way. IE will slip and pedal will have to come up quite a ways before engaging. Maybe you're not using it enough. If they sit for long periods the clutch will sometimes partially stick to the flywheel or pressure plate. Sounds like your problem. Try burning it by slipping the clutch with the brakes on and tractor in gear. Should clear it if not too bad. Good procedure if you are not using it very often is to park with a block of wood jammed under the pedal to hold clutch disengaged. That way clutch disc cannot stick to flywheel or pressure plate.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|