Ah but the original poster tried to do just that. But I guess that's ok cause he was trying to say the M is a great tractor. But I'm wrong cause I pointed out that IH made better tractors. I wasn't comparing power. I've done farm work with an Super C, M, 460D, 560D, 806, 826, 1086, 1206, 1566/86 series tractors made by IH, A, R, 3020, 4020 and 4440 JD's, Ford 8N's, CA and 190 XT AC's and with Case 970's. I'd rather spend a day in the field with a 460/560 than a day on a Super C or M and I've done with those tractors. If I don't get a bigger plow for my 1206 I will have to plow 60 acres in the spring with a 2-14 plow behind and Ford 8N because that's what I have. There is one guy in the area who uses an M for more tahn PTO power or poo spreading that I know of. Lots of 806/25/56/86 tractors still in the field doing work though. Fair number of 560's still being used too. Most of the non show M's I see are owned buy "summer" people with a couple of acres in case they come up in the winter to push snow and to mow a couple of ruff acres of ground once or twice a summer. I run my M less than 30 hours a year. But I run my 2 Ford 8N's about 100 hours and sometimes more. I mowed weeds in my pasture with the M, about 8 hours, did 4 hours of custom cutting and spread poo with it this spring.
Now I know a lot of people love the way the older tractors look but I like the looks of about 1960 and newer. Each to his/her own on that count. I think that of the pre 1953 tractors made the best were the IH M, JD R and Ford 8N. Post 1952, 7/8/1206 56 series and 86's were about as good as it got. Don't really care for the JD's of that age, and while the Case 70 series were a very nice tractor to operate they had too many problems. The AC's while being great looking through the 100 series were not well made and with the "power director" were a pain to operate. Keep in mind I have formed these opinions by actually being in the field on them and or owning them. Biggest mistake I made buying a tractor was an AC 190XT series III.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
