1). When you drive over a rock (there are some flat rocks just under the surface here) the driver really does feel it.
2). On the gravel track in the front paddock, it is rough, but better if the tractor is driven in 3rd or even 4th gear than in 1st. Not sure why this should be the case.
3). In the field the steering is slightly lighter and easier than with front rubber wheels. This was a very welcome surprise.
4). When you depress the clutch, the tractor stops on the spot most of the time.
5). Working with these harrows, the cast iron front wheels with skid rings are far superior to rubber on newly ploughed ground. They produce far less 'kick' through the steering than rubber tyres. This makes the work far less tiring for the operator and results in less wear on steering components.
6). The rear steel wheels have excellent grip for this work. They occasionally push ploughed sods backward, but no more so than rubber tyres. The operator is not bounced any more than on rubber wheels for this work. My experience using these harrows with a Farmall M on rubber was that rubber tyres do not provide better traction than steel.
Overall, I am very happy with the way the steel wheels perform for harrows. I have a set of rubber wheels for this tractor, which will probably be used in Summer for work on other farms as I have to drive the tractor on bitumen to get to the jobs.
I do not believe that steel wheels are superior for all work. For mowing and raking hay you must remove the skid rings and lugs to avoid severe crop damage and road travel is very limited on steel. Nevertheless, the results of this work are very satisfactory. I would not consider putting rubber on for this work with a Farmall.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.