Posted by Dan MD on September 24, 2012 at 16:48:15 from (184.158.79.230):
Hello,
I have been restoring a SMD from my Grandfather and have had quite the Inj. Pump experience. Initially I had a reputable shop go through the injectors and pump and told them do it right. I had pump governor issues after that and they wouldn't help me out. So I sent the pump to a well known reputable pump shop and they resolved the governor problem. Sadly, this pump started dumping diesel into the pump oil reservoir right away and I had to have them send me another pump. So this "new" pump has two issues. The first issue is this pump uses/loses oil. No sump dilution with diesel, it just is low. I added 12cc to top it off after an hour run. I have not heard of this before. The second issue is this pump idles like a pulling tractor at the lowest area of the rpm range. This issue is less annoying than the first. Now I had already called the pump shop manager about the funky idle before I realized it was consuming oil and I am sure he probably doesn't want to hear from me again. I also don't really want to yank the darn pump off again and have to fight the fuel leaks all over. On the other hand I don't want to run the pump out of oil either. I'm afraid a 4 hour run would really take the oil level down.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
