Posted by rustyfarmall on September 08, 2012 at 08:26:01 from (67.55.162.174):
In Reply to: farmall h oil pressure posted by jasinpa on September 08, 2012 at 07:59:07:
Quoting Removed, click Modern View to see
I speak from experience. My 1950 Farmall H had oil pressure issues. I dropped the pan, removed the oil pump, removed the bottom cover from that pump, and found the gears had worn depressions into that plate. Those depressions were a good 0.125" deep. I also took the spring out and checked it against a known good spring. There was nothing wrong with the spring. As I no longer have access to a milling machine (used to work in a machine shop) I used a large, flat file to restore the cover plate to its original state of flatness (dial indicator was implemented). I put it all back together, filled the pan with 15w-40 oil, and the oil pressure is now excellent. Just to further clarify, I went to SWCC in Creston, Iowa 1970-1971 and took the auto mechanics course. I then worked as a mechanic for a local John Deere dealer, later worked as a mechanic at a local Ford car and truck dealer, and also worked as a mechanic at an independent auto repair shop. In between mechanic jobs, I farmed, held a few other jobs, but always did ALL of my own auto repairs. Enough said.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.