I was wondering the same thing about by-passing the Tel-A-Depth spool valve. Disclaimer: I'm by no means a mechanic or tractor expert. You might be able to use one of the other valves by running a long hydraulic hose back to the quick hitch ram. Maybe one of the pros on here can answer that question better than I. The only thing is that that diff. gear set up is a self adjustment device. IH had a problem with their Tel-A-Depth system loosing pressure and lowering on its own. Not real good if you're plowing, disking, etc. I suppose the front end of the tractor could come up off the ground if it wasn't heavy enough.
You'll be very happy you got that shop manual. I bought mine when I was going through this issue as well. The I & T manual just wasn't making sense and at times seemed to contradict itself. The picture even showed the gears in the wrong final position. Man, I had one heck of a time with those things. The day after I got that manual I opened it up, looked at the picture, spent about 2 minutes changing the gears and spool position and WHALLA!
Make sure you read through that section of the book a couple of times before you do anything. Important: This is key--You have to be sure all the gears and levers are indexed before you take anything apart on that valve. Take pictures for reference with your phone or digital camera. You'll be glad you did.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
