Posted by SadFarmall on July 27, 2012 at 05:43:50 from (121.79.27.38):
In Reply to: 6v gen posted by PeteEllis on July 25, 2012 at 15:48:20:
You do not need to spin the generator faster. The voltage regulator (not the cutout) just regulates current flow to the field coils / pole shoes. Yes, a 6 volt generator will operate at 12 volts, BUT you should be careful. A generator in excellent condition internally will tolerate the change, so long as you do not increase the current output too much. However, if the internals are a bit tired (weak insulation etc) there is a serious risk of starting a fire. Personally, I would just fit a 12 volt generator. I presume that Delco-Remy manufactured 6 and 12 volt generators just as Lucas did. I had the option of fitting a C39 or C40 Lucas generator at either 6 or 12 volts. Even the voltage regulators look identical, apart from the 12V stamp.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.