Posted by farmallhal on July 25, 2012 at 16:06:28 from (76.4.182.42):
Working on restoring a Farmall 240 narrow front and have all the sheet metal off along with the fuel tank and other simple stuff. Looking at getting the radiator off and can't find much holding it in the tractor except those two hold down bolts on the bottom of the radiator along with the upper and lower hoses. To remove the nuts front the hold down bolts looks like next to impossible. They are in a narrow cavity of a heavy casting with little room for any type of a normal wrench or socket. The front bolster casting has no access holes to come up from below. There must be a trick as surely the radiator is removable. Anyone with the magic method I would certainly appreciate some assistance in how it is removed. Any and all suggestions are most appreciated, Hal.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.