Posted by Baum604 on July 17, 2012 at 18:55:33 from (74.98.25.123):
Last year I bought a '41 H and the previous owner for some reason or other put a M carburetor on it. It runs well with it and can't see any problems using it, but for the sake of having the correct carburetor, I want to put a H carb back on it. The problem I found with putting the H carb on the manifold is that the oval surface containing the two holes for the supporting bolts on the side of the manifold is larger than the mating surface of the H carburetor. With the M carburetor the mating surfaces are the same and the edges are flush with each other while with the H carb they are not. The picture shows it with the M carburator on it.
I noticed that the holes on the manifold side are elongated and will allow the H carb to bolt to it. Is this the way it should fit? I wasn't able to see another H to compare it to that has the same type of manifold. The manifold that I have is not for a distillate but one strictly for gas.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.