Re: Super C hydraulic line

Posted by NoNewParts on July 13, 2012 at 06:23:26 from (67.240.145.25):

In Reply to: Super C hydraulic line posted by Charllie in MO on July 12, 2012 at 19:17:59:

like said, since you have a SC, best option

is the factory lines, valve setup from a fast hitch

the bypass block is also a good option

saw one setup on ebay where the pressure line

was cut and sent to a remote valve, then back to the

line to go into the factory setup

on one of my SC's which needed a total rebuild on the

touch control factory hydraulics...

(stuck valves, pump deadheading always, factory remote valve was also junk)

I didn't need them, so I got regular C lines, and made a block off plate

with just the suction line hole drilled out.

removed the plug from the pressure side of the flange.

routed it thru an open center valve, with the valve return plumbed to

the touch control drain.

So, the touch control is just a reservoir.

works fine to run my fast hitch

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]