Posted by farmallhal on June 21, 2012 at 05:05:29 from (76.4.180.230):
In Reply to: Farmall H lever posted by James Bates on June 21, 2012 at 04:25:40:
You have a Heisler nine speed which adds four more speeds betweent the original 4th and 5th gears. It provides a 7 mph speed for use of a rotary hoe for which I believe it was originally designed. It will also provide an approx. 12 mph 4th for other uses with a significant amount of torque. These are not very common on a H as most are seen on the larger M's. Forward puts the transmission in high range and back puts it into the standard factory gears. It will also overspeed your belly pump and PTO so those shouldn't be used when the Heisler is in high range. My H and M tractors both have Heisler 9-speeds along with a disconnect lever for the belly pump. I think you will enjoy having this feature on your tractor, Hal.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.