Posted by wayne in mn on June 11, 2012 at 21:06:02 from (24.179.166.208):
In Reply to: serious carb cleaner posted by IndiRon on June 11, 2012 at 20:21:29:
Get a glass bead blaster and pressurized cans of brake cleaner. Carb cleaner leaves a residue behind so I prefer brake cleaner as the rinsing solvent. Lots of ventilation is advised and use compressed air to finish the job. There are several small passages so inspect carefully. I use a single strand of out of the multiple strands from a short piece of 14 gauge copper taillight wire; it will conform to bends in a passage and will not damage a brass jet internal opening. Other wire sizes may be needed. Study the carb and attempt to run wire through all openings; with a varnished carb it may be necessary to use a twist drill bit (hand operated) to open up the passage.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.