Posted by LRRifleman on May 27, 2012 at 15:12:56 from (108.117.4.46):
Hello!
I have a 1958 International 340 Utility that was converted to 12 volt by a previous owner. After having the engine checked due to starting difficulty. I was told that both the starter and the voltage regulator were "fried". Fortunately, my local (agricultural) Case dealer can get the parts I need at a reasonable price. However, being on pension and disability, I want to do the work I am capable of by myself, so I can avoid the estimated $500 labor expense to replace the starter and voltage regulator!
When I spoke with the people in parts, I was told when the conversion was done (if it was done properly), the starter should have been rewound for a 12 volt system, and the ground polarity reversed, from a negative ground to a positive ground.
What should I look for on my tractor to confirm that the ground was switched from a negative ground to a positive ground? Is it as simple as tracing the positive lead from the battery to the ground point on the chasis?
Any and all constructive advice would be vastly appreciated!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.