I just finished up converting my last tractor to 12 volt. Never had a hot start problem but did have -30, no wind chill start problems!
I'm kinda with the other guys on this. If the Mag is the problem you can convert to 24 volt and it isn't going to fix the Mag. It's just like a rope start lawn mower. A mag produces it's own electricity to make spark. When you turn the engine off you are grounding the system out. On a push lawn mower the throttle on the engine contacts a wile and ground is. On a garden tractor with a mag ignition the key switch ground out when turned off and on old tractors like the H the push/pull switch grounds it. Really old system had a spring steel contact mounted on the mag or on one lung engines by the spark plug that you pushed to a contact or the plug to kill it.
Try trouble shooting the system. ID what is wrong and fix that. Throwing parts at something can get real expensive real fast.
You can find many post on here about converting and everyone is for or against it. If you have low compression a conversion may make it start better but you still have low compression. Don't use a conversion as a band aid to cover up another problem.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
