Posted by Kevin Fritsche on March 11, 2012 at 13:24:06 from (70.241.79.223):
Hello, I apoligize in advance for the lengthy first post but here it goes. I am converting an "H" to 12 volts for my aunt. I read a lot of posts on here about the conversion but have some questions. I plan to use an Optima gel battery and will have to build a new battery box. It looks like width and height of the original box are OK but not the length. It appears it needs to be about 1 1/2" longer. Is there room to accomodate a slightly larger (longer) battery box? I will use a diode instead of the light in the alternator circuit. What amp rating does the diode need to have? I read these tractors were originally positive ground systems and the ammeter will read backwards which is easily corrected. How do you get the starter rotation correct? Some of the info I see is for the "M". Are the "M" and "H" electrical systems the same or close enough that the "M" info also applies? Will the standard pully on a typical alternator spin it fast enough to charge effectivly? I will take pictures and try to post them when finished. Thanks, Kevin
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.