Posted by Dan MD on February 26, 2012 at 12:07:29 from (72.160.225.142):
I am in the process of replumbing my entire hydraulic system. I am using the gutted belly reservoir with an IH live pump. Originally I was going to return the oil into the side 1/2" NPT hole that used to be a pressure port. Searching this sight, it sounds like the best results are when the return line enters the bottom of the reservoir. I am mostly going to be using the hydraulics for the 3 point hitch I installed with 2 way cylinders. I currently have 2 questions.
1. I have a 1" NPT hole on the side of the bottom of the tank for the suction line. Is it ok to "T" my return into this same suction line?
2. My tractor had the pressure side of the pump necked down to 1/2" right at the pump outlet instead of using 3/4" line. The valve I got is a 15 gpm valve with 1/2" in and out ports. Am I hurting anything using a 1/2" pressure line. I assume it may add some heat. I don't want to get a different valve.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
