Thanks for the reply. I've only got one set of rear remotes and those and the clutch side remotes are controlled by the inside tractor lever. The brake side remotes are controlled by the outside lever. I don't think I had that lever in the float position but to be honest I didn't think about that, I may have - I'll try that again. I'm fairly certain it's plumbed correctly, the inlet and outlet on the valve are plumbed to the side remote and the arm cylinders hooked to one spool and the tilt cylinders to the other.
The loader was actually off of a bi-directional versatile, we stretched the frame on it slightly and fabbed mounts to make it fit. There was no valve included, I'm using a Cross brand 2 spool valve. It does have a power beyond port which I'm not using currently. I thought that was only to add a 3rd spool?
Is there a pressure relief in the tractor that I could be tripping? I'm not sure on the specs of the external valve, maybe there is something in there that I need to change?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Gatherin of the Orange - by Rick Nikolich. In July of 1998 I was talking to fellow Allis Chalmers collector Mike Schilling about the annual "Gathering of The Orange" AC show coming up in August of 1999. He got this wild idea that we should get a convoy of AC tractors and drive them from Charlotte, Michigan 105 miles to LaGrange, Indiana.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.