Farmall & IHC Tractors Discussion Board |
Re: Re: Help! Cub clutch trouble
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by jakee on August 30, 2000 at 20:17:19 from (152.163.207.77):
In Reply to: Re: Help! Cub clutch trouble posted by gene b on August 30, 2000 at 19:45:00:
on the bottom of the bell-housing there is a round plate take it of and look up in there, the throw out berring does not take grease it is made out of a special material.you can ujst the free play threw that hole in the bottom,it is hard but can be done.also the figers on the presure plate may be ajusted but you will have to split tractor to do that and use a dial indicator to set them all the same.wen you look in the tunnel towards the transmision there is a arm back there with the nut on the back side some times it will come lose and have to be tightened up ,but to do that you will have to split the tractor,if you do split the tractor you must put a block between the radiator and the axel ,one on each side to keep the motor from floping over,take you time
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|