Posted by big a on November 25, 2011 at 22:42:28 from (98.23.142.32):
Been screwing around with this for about 6 weeks now, in my spare time, and getting nowhere.
Tractor has been sitting for about 10 years, so I have no idea how steering really ever did work on this. Initially, I had hard steering both directions, but was somewhat easier to the left. System will make about 900 psi in LH turn, but only 100-200 psi in a RH turn. With the front end off the ground, the steering wheel turns freely, so I don't suspect a mechanical issue, like binding anywhere.
I suspected that the problem was in the steering control valve, so I removed it and dissassembled it for inspection. No problems found, and I reassembled it and reinstalled it. Now it turns easily to the left, still have the same pressures, and still hard to steer to the right. The steering shaft is free to move in and out, and seems to activate the valve in either direction, so I am not sure where to head next. Inspected the hyd filter, with no blockage found.
Sure was hoping to find that nut loose, or the spring broken, but no such luck. Any ideas as to where to look next? That difference in relief pressure between left and right really has me stumped. Is it possible that I have internal leakage within the front bolster itself?
The fact that this worked better after I had it apart makes me think the problem may be within the control valve, but for the life of me, I can't see a thing wrong with it.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.