Posted by Tom Fleming on August 23, 2011 at 03:56:52 from (67.20.249.95):
In Reply to: Log splitter posted by devo on August 22, 2011 at 11:30:08:
Available pressure on the ram is based upon surface area (as people have stated). take the radius of the cylinder (diameter divided by 2) and multiply that by 3.141 (Pi). This will give you the surface area approx. of the ram. Multiply that by 850 psi and divide by 2000. This will give you the close approx. of tons of splitting force.
Now, do the same for 2000 PSI which is probably what the current splitter is rated for. This will tell you the capacity of the splitter frame (to Wardner's point).
Larger ram will do the job, but not sure you will like the price of a 5" or 6" cylinder with a 24" stroke. Either way you can boost the pressure with a different pump or you can increase the cylinder size. Both will acomplish the same thing, but in different approaches. Both are NOT cheap.
PS: I forgot to add, that the radius is squared. My bad.
This post was edited by Tom Fleming at 17:14:27 08/23/11.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.