We ran that same model & size plow on a 450 from about 1960 till 1966. It was all othe 450 wanted in our Ipavav & Sable loams. It would depend on your soil types as to whether your 350 would handle it but unless your on very light soils & don't want to plow very deep I would recomend either a 2x14" or possibly take a bottom off that plow. If your handy with a torch & welder it shouldn't be that difficult of a job.
FWIW, our 450 had over size sleeves & pistons so was turning more than a stock 450. We also ran a dual on the landside, min. 6 weights on the furrow wheel, fluid in the rear tires & a weight stuck out about 2' from the front end. Usually plowed in 3rd TA so we could go to high when plowing in lands or in straight 2nd when plowing around the field so we had the TA for when going got tough & for the corners.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.