Yes, without knowing what exactly you have, nobody can tell you exactly what you need. I'm gonna assume you have a stock tractor with no 2-way valve.
It's really pretty simple once you've seen it. People always think hydraulics are this mysterious complicated thing...
To get down pressure, you need a 2-way open center hydraulic valve of some sort. Originally the tractor would be equipped with the optional 2-way "christmas tree" valve mounted on the right side behind the hydraulic block.
You can use any commercially-available 2-way open center hydraulic valve. When shopping look for one with NPT ports, so you don't have to mess with adapters. Mount the valve somewhere convenient.
There are two pressure ports on the rear of the H hydraulic block. Cap one off and run a hose from the other to the IN port on the valve. Run another hose from the OUT port on the valve to one of the drain plugs on the hydraulic block.
Run a hose from one work port on the valve to the rear of the tractor. Install a TEE fitting on the end of the hose. Run two short hoses from the TEE to the SAME END of both hydraulic cylinders.
Do the same for the other work port to the other end of the cylinders.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.