Posted by Dan G on May 31, 2011 at 15:42:14 from (208.111.228.135):
Ok, I"ve used John T"s diagnosis and it my H passed all the tests, but still wouldn"t generate DC. Replaced all wires (one at a time!) took apart generator and put back together. Ammeter definately works, I went thru his whole checklist. Motor test on GEN worked too...went back over it and I missed step 6... So I grounded the F terminal (to battery ground) on the GEN and jumped the BAT and GEN terms on the regulator and instant + volts on the ammeter. I shut it off, and restarted and as long as that grounded wire is on the F term it generates fine. What"s wrong? I"ve replaced almost everything on this tractor once already and I"d rather replace/repair the right faulty part.
BTW, GEN was professionally rebuilt 1.5 years ago, battery is 3 months old, and regulator is about 2 years old.
It"s a 6volt positive ground system without Cutout relay, (4 term regulator (BAT, GEN, F, L)
Can I just leave the F term grounded? Something is telling me no.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.