Posted by jal-SD on May 04, 2011 at 18:33:49 from (208.53.222.169):
In Reply to: H fan belt adjustment posted by Eric Allen on May 04, 2011 at 18:11:08:
The pulley on the water pump is a split pulley, you tighten the belt by adjusting the front chive. It’s threaded onto the shaft. There is a set screw with a lock nut that goes into slots in the pulley shaft so the front half of the pulley can move forward and back by tightening or loosening it. Use lots of penetrating oil to soak the threads up, they probably haven't been moved in 50 or so years. CAUTION: The front chive will break if you tap on it too hard with a punch. A new one was still available and was about $55 two winter ago. If you break it, the radiator has to come off to replace it. The generator pulley works the same way. I have seen some welded in place, so look it over carefully before you try to adjust it. (My $0.02 worth. jal-SD)
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.