Posted by mkirsch on April 27, 2011 at 05:12:14 from (64.80.110.75):
In Reply to: Single bottom IH plow posted by James Williams on April 26, 2011 at 19:02:59:
With a 1-bottom plow, there's only ONE landside. I guess it could be the "rear landside" but it's also the "front landside."
The landside is what presses against the side of the newly-cut furrow, and keeps the plow running straight. It is down on the lower left side of the plow bottom.
If you're trying to run with worn-out, broken, or missing parts, you can't expect the plow to work right.
Did you adjust the tongue on the plow to make trail behind the tractor? If you swung the tongue too far to the left, the plow will just want to straighten out behind the tractor when you drop it in the ground.
If you sight straight backward from the end of the tongue, you should be at least in line with the landside edge of the bottom. Actually, you should be somewhere in front of the bottom. Anywhere to the left of the bottom will cause the plow to pull crooked.
A 1-bottom plow requires a narrow tractor like an A or B, or it must be hooked far off to the right on the hoop drawbar of an H or M.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.