Well I was able to open up the valve and cleaned it out. The screen was a little gunky but not too bad, but it could have been plugging up those small holes at the end of the screen. I also cleaned up the inside of the piston chamber as best that I could but I could not for the life of me get the part with the ball in it to come out. I made a small spanner wrench to unscrew the ball valve but I couldn’t get it to unscrew! I bent the tool which was hardened steel, but it didn’t budge. I did push on the ball and oil came out and I cleaned it all with carb cleaner and the ball seemed to be doing its job and holding even the thin carb cleaner behind it. It wasn’t rusty so I put it back together. As soon as it stops raining for more then 1 day I will be able to try it out in the field and see if its working right now. I also adjusted the draft control which was set wrong and causing the 2pt hitch to be pressurized when it was all the way up. But I know I wasn’t running it all the way up when the problem occurred. At least it’s cleaned up and adjusted right, Ill let you know if it keeps happening.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.