Posted by dieseldalec on February 12, 2011 at 21:06:35 from (68.28.168.228):
After double, triple and quadruple checking the entire fuel system and the entire ignition system. On the last running test I noted that the issue was a LITTLE better with partial choke enguagement.Has to be lacking fuel! Back to the carburator for the 5th time! Everything still looks perfect all passages clear and clean! I had previously done some surfing on this board and came back to it today and sifted through all relevent articles going back to at least 2007. I decided I obviously had a carb prob and had nothing to loose by drilling the main jet and the 2 lower orafices on the venturi nozzle tube as once suggested by RUSTYFARMALL on this board a few years ago. There were several folks with varios idea's different size suggestions etc. I ended up drilling the main jet and both lower tube orfice's .062". The carb adjusted out and the tractor runs PURRRRFECTLY!! As I knew it should after the major inframe O/H. I guess the sorry gasoline we pay too much for today,milling the head and freshening up the cylinders raised the comp enough to require more fuel than the machine was designed for? Again this is a 1950 M barn find original everything, paint decals loaaded with options,little to no rust anywhere etc!! I'm glad it's solved!
Thank You Rustyfarmall,Yooperfarmall,Laboyteaux,IHredo4, Dukester,Ohiohillbilly,47farmallm,teddy52food.
This thing runs so good now I think I could latch it up to Iowa and drag it all the way down here to Texas!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
