Re: M engine

Posted by Janicholson on January 29, 2011 at 19:42:30 from (67.72.98.57):

In Reply to: M engine posted by poco on January 29, 2011 at 18:36:08:

247.7 was the gasoline engine displacement from the factory. The engine has likely been rebuilt one or more times, so there could have been changes, the most common is 264 Cubes if the Thin sleeves were used to match a Super M. But larger displacements can be provided with running the piston in the cast bore, and boring the cast bore larger and even bigger pistons. Stroking is also possible, but not likely unless someone was carried away. Displacement could be taken with a fluid in the cylinder and measured for volume, but it depends on how earnest you are in determining the displacement. Jim

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]