Posters, putting 2 pictures on. Fixing up a M for a user tractor out of parts I have. thought this would work but wondered if there would be a problem after getting into it. Don't have the hoses on yet, but you can see the openings. Planed to have the oil level 1/3 to 1/2 in the top tank. Mostly using it for expansion so the lower can be run full. Upper tank is from a 400 tractor turned backwards. Outlet is taped to the same passage as used on the 400 and plates on top sealing the regular outlet. Planed to return oil to the lower opening in front of top reservoir. Made a baffle droping down from plate on top of reservoir to the inside to baffle the return port. Vent port is on the other side of the reservoir and exstends to other side of the baffle near top center of the reservoir. Lower belley pump housing is just a empty housing now with all but top and bottom holes pluged and inside cleaned. I can put a screen in place of the bushing in lower reservoir, or use the 400 screen in the upper tank.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
