Re: Farmall c conversion to 12 volt

Posted by John T on December 04, 2010 at 07:41:27 from (66.244.97.31):

In Reply to: Re: Farmall c conversion to 12 volt posted by gbs on December 03, 2010 at 19:04:43:

Mornin gb, FWIW I have done the same as you, used the old 6 volt genny and just changed to a 12 volt Voltage Regulator and it indeed "worked" BUT IM NOTTTTTTTT SAYING ITS ENGINEERING CORRECT ONLY that it worked........ A genny dont necessarily know what its output voltage is, it increases if you 1) Spin it faster or 2) Pump more current through its Field windings (the VR regulates field current). However, therein lies the "real" question i.e. can the fields stand up to the necessary current (same resistance but you apply twice the volts remember) and not overheat or not damage the insulation integrity.

A genny shop can change the field windings and the armature if necessary to do an engineering "correct" conversion but it may be cheaper to just get a 12 volt n be done with it

Snow here in Indiana

John T

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]