An out of adjustment TA can cause shifting problems. Often if you can't get it out of gear, pulling the lever back will allow you to shift. Loose linkage can cause problems also, both the external rods, etc, and inside the clutch housing. It has to be adjusted by the manual (but if everything is sloppy, you have to try different things to adjust it) --too long for me to post here, maybe someone else will, but you need the I&T or IH manual. What that procedure does is make the TA clutch disengage about the time the main clutch disengages. Loose linkage makes it next to impossible to adjust correctly, it will cause excess gear clash when shifting. It will free wheel with the lever back going down hill. The best test to see if it is working right is to use it under load, if it slips with the lever back, it is either out of adjustment or needs to be overhauled. If you do not have a way to put it under load, put it in 4th (does not need to be full throttle) pull the TA back and push hard on the brakes, the tractor should slow down and possibly kill the engine. That's plain english, I have to leave the complicated stuff for someone who knows.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.