Posted by LenNH on October 28, 2010 at 14:52:48 from (24.128.163.35):
In Reply to: F-20 high speed 4th posted by oldiron29 on October 27, 2010 at 03:32:04:
The original F-20 steel wheels were 40", but 36" rubber gave a larger-diameter wheel. Once, many years ago when I was an eager whippersnapper, I actually ran an F-20 on 36" tires next to an F-12 (40" rubber). The F-20 was almost as fast in second as the F-12 in 3rd. I estimated at that time that 4th gear gave around 5 mph, maybe a little more with the engine at high idle. Recently, I saw a table that shows the effects of rubber tires on these tractors, and it turns out my guess was pretty close (just under 5 mph in 4th gear at governed load speed). Will look for this table among my papers, and will pass it on when I find it. One interesting thing that was immediately apparent to anybody who ever spent much time on steel-wheeled tractors is that steel wheels waste probably a third of the engine power, while rubber tires lose quite a bit less--maybe 15%, even less today with improved tires (I had about 10 years on 3 steel-wheeled tractors--an F-12, a 10-20 and an early Oliver Row-Crop). If you're an armchair engineer, you can dig out the Nebraska tests and compare a number of tractors. What is absolutely wonderful is to find the same tractor tested on each type of wheel--there are a few (F-12 was on steel, F-14, as I remember, on rubber; the percentages of loss should be the same for either tractor). My original point is that with rubber tires, an F-20 would pull at nearly 4 mph (36" rubber, second gear) what it had originally pulled at 3 mph on steel; less power wasted meant the tractor could pull more. A neighbor had had a steel-wheeled F-12, which he thought pretty anemic. When he borrowed my father's F-12 on 40" rubber, he was amazed at what it would do. We always pulled a 7-foot double-disc, which had come with the '29 10-20 we had on the farm. The F-12 shouldn't have been able to handle that disc, but it did.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Picking Corn - by Rick Nikolich. It was the day before Christmas shutdown at work and I asked our lead engineering expert Scott Andrzejewski what he was going to do over the holidays. He said that he had some corn that he still needed to pick with an antique one-row New Idea corn picker. Scott has a nice farm about an hour north of Lansing in St. Johns, MI. He wanted to get the rest of his corn in by the next day (Christmas Eve). We had about an inch of new snow on the ground and single digit temperatures. So in the bac
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
