Farmall & IHC Tractors Discussion Board |
overheating
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by George on June 18, 2000 at 13:08:15 from (209.32.187.53):
I think ive got it narrowed down to the 1) waterpump, or 2) radiator -i dont think its thick enough to do the job. how thick is everyone elses? should i be worried if it runs rough when it gets hot? ive got a 180 thermo in there and it stays right there when its not under a load, but it does not take too long for it to make it up to 210 when its working (and 230 if im not watching it closely) which is very irritating since im STILL trying to put this garden in and i have let this thing cool down every 15 minutes. btw- thanks all who helped out with the coil. i added another little gismo from the truck off the coil (small and tubular with 1 wire) and when that did not do it i (in desparation) screwed with the points a bit and its never run so strong. that is up to about 210 then starts to get a bit rough- BUT never stalls
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|