Posted by toolz on September 21, 2010 at 19:34:46 from (206.221.147.30):
In Reply to: 414 into a 666 posted by Blackstack on September 20, 2010 at 09:39:35:
Haven't done it, but am starting on a 560 soon, so I'll tell you what I think I know. Any rear engine plate from a common 400 series tractor engine will bolt to your clutch housing, but the flywheel will be too far forward to engage the starter (at least that's the case on a 560). A spacer will have to be made to move the flywheel rearward enough to work. Don't know about the ring gear diameter on the 666, but the flywheel has to be turned down to fit a 560 ring gear for it to work on my tractor, might have to do the same on yours. The front engine plate will bolt inside the frame rails, but has to be machined narrower to fit between the 560 rails, possibly on yours, too. The engine will probably be too long for the fan to fit behind the radiator, so the rails might have to be lengthened a little, or a spacer machined to fit between the rear of the rails and the engine plate, which is what I might do. In my case, the fuel tank has to be modified to clear the valve cover. The rest involves linkage and plumbing, which shouldn't be a big deal. It's definately not a bolt-in deal, but it can and has been done. These are the things I've read or been told, I may be wrong, and will find out how wrong as I do the swap this fall/winter. I'll be an expert by spring...
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Niagra View Mobile - Powered by a 1959 Ford Tractor - by Mark Massey. In 1959 the Niagara Frontier Transit Inc. of Buffalo, New York designed and built six Viewmobiles for the Niagara Frontier Sightseeing Inc. for use as a sightseeing ride at the Niagara Falls State Park, Niagara Falls, New York, powered by a 1959 Ford 611 Tractor.
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
