Posted by Roger46 on August 24, 2010 at 17:46:35 from (72.100.13.139):
Last winter I completely rebuilt my Farmall A engine including new sleeves, pistons, rings, bearings, reground crank, new valves/springs/guides, hot tanked block, and new clutch. Basicly, it is a new engine. I have a Woods 60" belly mower on this tractor and have been cutting grass all summer on a weekly basis as we have had a lot of rain this year. It takes about 1 1/2 hours to cut the grass and with all the rain, the load on the tractor is substantal and variable. I installed step pistons from Tisco, so I have much more power than I used to have. The problem I am having is that the tractor smokes every time I start it (hot or cold) and it smokes when it is idling. It doesn't smoke under load (unless it is burning it better). It seems like a valve guide problem, but I put in new valves and guides. It has used about 2 quarts of oil this summer. I also thought maybe the rings haven't seated, but I don't know why or what to do about that. This is not like my first engine overhaul as I have done many other tractors without this problem. Can anyone make any recommendations? One additional piece of info is that this tractor did similarly before the overhaul, so is there something wrong in the head that didn't get corrected at the machine shop I took it to? Roger
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
