Posted by mkirsch on July 21, 2010 at 06:48:41 from (64.80.108.56):
In Reply to: Applying decals posted by HicksDale on July 20, 2010 at 21:16:14:
I also use Windex or Glass Plus to "float" the decals in place. Wait for the paint to cure for at least a week. Use lots of Windex. Float the decal in place and carefully work as much moisture out from under with your fingers. Wipe up excess liquid with a clean soft cloth. Allow to dry for about 30 minutes, and re-squeegee with your fingers once again to float out any bubbles and excess liquid. Wait another 30 minutes, and rub the decal down again.
I find that actual squeegees scratch things up.
Avoid touching the adhesive with your fingers. Use single-edge razor blades to lift the decal off the backer and place it on the tractor. Otherwise, you will have an unsightly fingerprint showing through anywhere the decal is clear, and it will not stick to the tractor anywhere you touch it.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.