Posted by jay42782 on July 10, 2010 at 19:58:04 from (72.2.175.252):
well for those who seen my previous post on the pump problem i found it.removed the pump and found the key sheared and caused small damage to the shaft.
a new pump runs 800.00 bucks and trying to find used parts for this machine is a task.
the drive shaft that connects the pump to the engine is fine..no damage.but the gear shaft coming out of the pump is where the problem is.
i was wondering what you guys thought of me taking the pump to a machine shop and having a new key way and woodruff key made on the other side of the original key way that has damage.all it did was take just enough material for the key to fail.there is still plenty of shaft there.one little piece missing.
the other thing i though i might be able to do is delete the woodruff key and drill a hole through both the gear shaft and drive shaft and replacing the key with a bolt.is this a good idea or not.things are not the best right not financially and i need the loader asap.
let me know what you think or if someone has a part number for just the shaft.i never have luck searching for parts on this thing.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.